yes, another computer question...

It'sasecret

Literotica Guru
Joined
Jan 15, 2001
Posts
1,481
Ok, so my scanner stopped working. The power light was not going on so I bought a new power cord. It worked for a few weeks and now I am having the same problem. What could be making the power cord not work? Thanks in advance for the info.
 
a short in the plug. or a short in the port in the back ofyour scaner or frayed wiring, or a cat that eats cords (like mine)
 
So should I just buy a new scanner? I don't think it is a short in the wire, b/c it happened with 2 different wires. I guess it is a problem with the port in the scanner. But, why did it work (for a short time) with a new plug?
 
could be lots of reasons, hell you could have bought a defective wire again.
 
The wire is almost as much has the scanner, so I guess I will just get a new scanner.
 
It'sasecret said:
The wire is almost as much has the scanner, so I guess I will just get a new scanner.

Those cords are standard, so try it out with another piece of equipment to see if it's the cord.
 
It'sasecret said:
Ok, so my scanner stopped working. The power light was not going on so I bought a new power cord. It worked for a few weeks and now I am having the same problem. What could be making the power cord not work? Thanks in advance for the info.

What sort of "power cord" does your scanner take? An HP standard three wire 120VAC power cord, or a transformer/rectifier/adapter with a thin cord and a stereo-like plug?

If it's the latter, then It's probably a "short" in the scanner that's burning out the trnsformer by drawing more curent than it's designed for.
 
Back
Top