Byron In Exile
Frederick Fucking Chopin
- Joined
- May 3, 2002
- Posts
- 66,591
Thank you for that post!Back in the early 1960s, long before the Mary Rose was raised, I and a friend made longbows with the information we could obtain at the time.
We had unofficial access to the resources of a Royal Dockyard, and some suitable yew staves.
We made two. His had a draw weight of 110 lbs; mine was 180 lbs.
With a greased pointed steel head at a distance of 30 yards, my bow could pierce six inches of seasoned oak; his four inches. Both bows would fire arrows right through 1/4 mild steel, ripping off the fletching. Mine would do the same with 1/4 steel plate. His would pass through most times.
We weren't satisfied until we had constructed a crossbow as well. We used a car's spring and a hand windlass rated to 1000lbs. Our bolts were sharpened steel rods with welded flights. That crossbow, we only made one, had a useable draw weight of 300 to 350 lbs. We could crank it to a higher level but the trigger mechanism couldn't cope.
The crossbow's bolts pierced everything we tried including some one inch armour plate but then our superiors objected to us firing dangerous weapons in the Dockyard and our experiments had to end.
With the heavy drawweights of the longbow, and the jarring of the crossbow's release mechanism on firing, we found that accuracy was almost impossible. Perhaps we could have achieved accuracy with more practice, but repeated drawing of the 180 lb pull was tiring after only half an hour. The archers at Agincourt and Crecy kept shooting for hours...
Certainly helps flesh out this scene: http://www.youtube.com/watch?v=cRj01LShXN8
Cocky French bastards.
I'd rather die fighting those stupid asshats than in some retirement home.