shite

Back in the early 1960s, long before the Mary Rose was raised, I and a friend made longbows with the information we could obtain at the time.

We had unofficial access to the resources of a Royal Dockyard, and some suitable yew staves.

We made two. His had a draw weight of 110 lbs; mine was 180 lbs.

With a greased pointed steel head at a distance of 30 yards, my bow could pierce six inches of seasoned oak; his four inches. Both bows would fire arrows right through 1/4 mild steel, ripping off the fletching. Mine would do the same with 1/4 steel plate. His would pass through most times.

We weren't satisfied until we had constructed a crossbow as well. We used a car's spring and a hand windlass rated to 1000lbs. Our bolts were sharpened steel rods with welded flights. That crossbow, we only made one, had a useable draw weight of 300 to 350 lbs. We could crank it to a higher level but the trigger mechanism couldn't cope.

The crossbow's bolts pierced everything we tried including some one inch armour plate but then our superiors objected to us firing dangerous weapons in the Dockyard and our experiments had to end.

With the heavy drawweights of the longbow, and the jarring of the crossbow's release mechanism on firing, we found that accuracy was almost impossible. Perhaps we could have achieved accuracy with more practice, but repeated drawing of the 180 lb pull was tiring after only half an hour. The archers at Agincourt and Crecy kept shooting for hours...
Thank you for that post!

Certainly helps flesh out this scene: http://www.youtube.com/watch?v=cRj01LShXN8

Cocky French bastards.

I'd rather die fighting those stupid asshats than in some retirement home.
 
yes. i know. on account of not being a complete fucking moron.

don't be such a patronising twat.
I'm sorry, love.

But I am a patronizing twat. I expect you knew that when you emarried me, else you're dumb as a brick.

Still, we love each other, always will, so fook off and stop acting like you're Queen of the fooking castle.
 
I'm sorry, love.

But I am a patronizing twat. I expect you knew that when you emarried me, else you're dumb as a brick.

Still, we love each other, always will, so fook off and stop acting like you're Queen of the fooking castle.

byron? i want a fooking castle!
 
We don't have to like all of our grandparents, now, do we?

Some of them are from fooking England.

Thank the gods if they're not from France.
 
i'm pissed
i'm sloshed
i'm half cut
i'm wankered
i'm... drunk
 
well... yes!
You know I'm just the guy to break a pattern, right?

but, baby, you know nobody else will ever love you like i do.
Maybe. But I also know that I have tons of cash and no heirs. And I'm not dumb.

i'm keeping them pink.
That business in Costa Rica left them both dead. Don't even try to play that card.

Look, girl, the only way to make money like that is to be in America.
 
if i only wanted your money i'd have killed you in your sleep :)
 
northern

you're both turning frikkin' northern! scallies :mad:
All we in the US have to go on is what we see on telly!

What else have we to go on?

They're deleting T's in the middle of words, as though that's normal! Pronouncing "Y" at the end of a word like "eh."

Not quite sure what to make of it.

Do people in England really communicate in this manner?
 
Twat - various meanings

(i) To hit someone
(ii) A stupid person
(iii) A vagina

do you know the history of that?
it's literally hundreds of years of traditional insult.
or so they say...

Apparently this is shite, an urban myth invented in the 1970's/80's...

In the 1970s, anthropologist and author Desmond Morris made a detailed study of the history of the rude V-sign, and came up with ten possible explanations for its origin. His 1979 book, Gestures, Their Origin And Distribution, has a whole chapter on the sign, yet he does not even mention archers. This suggests that the story was invented after 1979.
http://www.qi.com/talk/viewtopic.php?t=6804&start=0&sid=8b8c9e0cd5e45b8e3fdbaff2bcd53b60
 
Back
Top