Glass Dildos
- Thread starter BlueSugar
- Start date
Weird Harold
Opinionated Old Fart
- Joined
- Mar 1, 2000
- Posts
- 23,768
BlueSugar said:
Aside from all of the other benefits and (mostly unfounded) worries about breakage, Glass is almost totally non-allergenic and sterilizable.
If you have any concerns about being allergic to Latex, Acrylic, or Rubber, Glass is the Dildo material for you.
I'm not sure if the "Dishwasher Safe" comment was intended as a joke or not, but it is nevertheless true. Glass can also be boiled to sterilize it or immersed in Hot Water to bring it to exactly the right temperature for comfort -- and it will hold a steady temperature longer than most other materials.
For those who are Vibrator addicted, Glass transmits vibrations very faithfully -- touch the base of a Glass Dildo with a vibrator and it becomes a vibrator.
H'venlee
Wickedly Teasing Wench
- Joined
- Apr 5, 2002
- Posts
- 11,976
I have 2 of these and absolutely love them. They can be placed in hot water to warm them up, or under cold water to cool them down. I have not been brave enough to try the freezer trick yet. 
I picked up the ones made by E-Glass. They were only $30 a piece. The sensation is awesome! They are easy to clean. And I have even dropped mine accidentally with no mark to show.
I would encourage any woman to try one. They are wonderful.
Oh....and they are great for tub fun too....very waterproof.
http://www.glasssextoy.com/e-glass.htm
I picked up the ones made by E-Glass. They were only $30 a piece. The sensation is awesome! They are easy to clean. And I have even dropped mine accidentally with no mark to show.
I would encourage any woman to try one. They are wonderful.
Oh....and they are great for tub fun too....very waterproof.
http://www.glasssextoy.com/e-glass.htm
Carnus
Reality, yours or mine?
- Joined
- Aug 25, 2002
- Posts
- 1,525
H'venlee said:I have 2 of these and absolutely love them. They can be placed in hot water to warm them up, or under cold water to cool them down. I have not been brave enough to try the freezer trick yet.
I picked up the ones made by E-Glass. They were only $30 a piece. The sensation is awesome! They are easy to clean. And I have even dropped mine accidentally with no mark to show.
I would encourage any woman to try one. They are wonderful.
Oh....and they are great for tub fun too....very waterproof.
http://www.glasssextoy.com/e-glass.htm
Those look very very interesting, especially the ruby one. So which one do you have and ummm can I watch (help)?
I did make a clear one once, a mold of myself actually for a girlfriend of long ago. I went to Hobby Lobby and got a carton of plaster of paris and 2 pints of clear epoxy resin, then made a mold of me while hard (keeping a hardon for 10 minutes while enveloped in plaster of paris was a challenge) then let it dry overnight, filled it with epoxy, let it cure to 2 days and broke off the plaster. That was 7 years ago and according to an email we exchanged a few months ago she still has it and still likes it.
Carnus
Carnus said:
Oh, WOW.
These questions might sound funny, but they are serious:
Can you go into more detail on how you made it? How did you get the plaster of paris to stay firm enough? What position were you in when you did it? And...did you wrap something around your cock, like thin plastic wrap? How did you keep the plaster from adhering to your skin?
My man and I want to do this...I really want a dildo that feels just like him.
We don't want to go to a sex shop and have it done...we would rather find some way to do it ourselves, in private. This sounds like it would work! And...just HOW close was the model? Did it really capture 'you'?
Thanks!
S.
His Flower
Really Really Experienced
- Joined
- Apr 23, 2003
- Posts
- 305
sheath said:Oh, WOW.
These questions might sound funny, but they are serious:
Can you go into more detail on how you made it? How did you get the plaster of paris to stay firm enough? What position were you in when you did it? And...did you wrap something around your cock, like thin plastic wrap? How did you keep the plaster from adhering to your skin?
My man and I want to do this...I really want a dildo that feels just like him.
And...just HOW close was the model? Did it really capture 'you'?
Thanks!
S.
I'm just as curious about this as sheath. Please do tell.
His Flower
BlueSugar
Faceted Sensualist
- Joined
- Jun 13, 2003
- Posts
- 7,608
They also sell sensual molding kits on the internet and on toy sites that have safe to use everything. I haven't done it, but I would like to eventually Ya never know the quality of things so I like to get research done before any major purchase !
Ya never know the quality of things so I like to get research done before any major purchase !
Etoile
Mod, 2003-2015
- Joined
- Dec 20, 2000
- Posts
- 17,049
They sell them at one of my local kink stores, too. Haven't ever really looked at the bucket in detail.BlueSugar said:They also sell sensual molding kits on the internet and on toy sites that have safe to use everything. I haven't done it, but I would like to eventually
Weird Harold
Opinionated Old Fart
- Joined
- Mar 1, 2000
- Posts
- 23,768
BlueSugar said:
Most of the kits I've seen on the Web produce a Latex or "Silicon Rubber" Mold that is re-useable, unlike the Plater of Paris process described above.
They also (apparently) set up faster than Plaster of Paris,so the problem of maintaining an erection is minimized.
I'd suggest that buying a kit is probably the best way to create a personal dildo rahter than trying to re-invent the wheel and design your own process.
Carnus
Reality, yours or mine?
- Joined
- Aug 25, 2002
- Posts
- 1,525
The way I did it was almost silly, but here goes.
First I mixed the plaster of paris in a 2 quart plastic pitcher (had one handy) and made it the consistency of really thick mud, then I put on a non-tipped condom, your basic, non lubed, non anything condom. I put the pitcher between the couch cushions, with a couple of pillows around it and laid down on my stomach and flipped on some really good porn to help me keep ummmm in the right state for molding. As the plaster of paris starts to harden it does get a little bit warm, but not too hot really. The most difficult part was not moving for a while until it was set well enough that it retained its shape. The way I used to judge that was to slide a hand down and press into the top of the plaster, when it was hard enough I could not dent it easily with my finger (about 20 minutes) I turned off the tv, let myself go soft and pulled away. I let the plaster cure nice and solid, sprayed it with Pam cooking spray and filled it with the resin and let it harden, then I just cracked the plaster and boom, one instant penis. Not hard to do at all and most likely a lot easier with a partner.
How close was the model,, very close, the only part I sort of cheated on by shaping the plaster was I gave it a set of testicals as it was only my shaft, but it included very good detail including veins and skin texture as well. If I were to do it again I think I would use a cock ring to make the veins stand out better and make me a bit thicker too.
Have fun and good luck.
Carnus
First I mixed the plaster of paris in a 2 quart plastic pitcher (had one handy) and made it the consistency of really thick mud, then I put on a non-tipped condom, your basic, non lubed, non anything condom. I put the pitcher between the couch cushions, with a couple of pillows around it and laid down on my stomach and flipped on some really good porn to help me keep ummmm in the right state for molding. As the plaster of paris starts to harden it does get a little bit warm, but not too hot really. The most difficult part was not moving for a while until it was set well enough that it retained its shape. The way I used to judge that was to slide a hand down and press into the top of the plaster, when it was hard enough I could not dent it easily with my finger (about 20 minutes) I turned off the tv, let myself go soft and pulled away. I let the plaster cure nice and solid, sprayed it with Pam cooking spray and filled it with the resin and let it harden, then I just cracked the plaster and boom, one instant penis. Not hard to do at all and most likely a lot easier with a partner.
How close was the model,, very close, the only part I sort of cheated on by shaping the plaster was I gave it a set of testicals as it was only my shaft, but it included very good detail including veins and skin texture as well. If I were to do it again I think I would use a cock ring to make the veins stand out better and make me a bit thicker too.
Have fun and good luck.
Carnus
Last edited:
Etoile
Mod, 2003-2015
- Joined
- Dec 20, 2000
- Posts
- 17,049
God, that sounds like fun, makes me wish I had a dick to mold! The Clone Your Bone people also offer a product called Match Your Snatch, but it doesn't look nearly as good.
wideeyedgrin
Literotica Guru
- Joined
- Jun 21, 2003
- Posts
- 1,033
glass dildos
I was talking to a friend that is a luggage inspector at an airport. He told me about one guy that was on his way to a XXX convention/movie awards. Anyway, the guy was a glassblower, and had a carryon bag full of glass dildoes. No embarrasement on his part, but my friend turned bright red having to handle them to inspect the rest of the suitcase. He said that they were all different colors and shapes, and that some were intended as either prizes or sculptures.
I was talking to a friend that is a luggage inspector at an airport. He told me about one guy that was on his way to a XXX convention/movie awards. Anyway, the guy was a glassblower, and had a carryon bag full of glass dildoes. No embarrasement on his part, but my friend turned bright red having to handle them to inspect the rest of the suitcase. He said that they were all different colors and shapes, and that some were intended as either prizes or sculptures.
Carnus
Reality, yours or mine?
- Joined
- Aug 25, 2002
- Posts
- 1,525
Re: glass dildos
heheheh,, but did she get a business card?
Carnus
wideeyedgrin said:I was talking to a friend that is a luggage inspector at an airport. He told me about one guy that was on his way to a XXX convention/movie awards. Anyway, the guy was a glassblower, and had a carryon bag full of glass dildoes. No embarrasement on his part, but my friend turned bright red having to handle them to inspect the rest of the suitcase. He said that they were all different colors and shapes, and that some were intended as either prizes or sculptures.
heheheh,, but did she get a business card?
Carnus
Rather then glass, which I have heard is wonderful, I just recently purchased a pyrex one. OMG Ladies they are terrific, not only do they not break (unless of course dropping it of a high building that may cause breakage) the heat sensation stays longer, plus you don't have to use and excessive amount of lube, as glass is smooth so is pyrex. They are easy to maintain,(dishwasher safe) and the feeling of the intensity of heat is most enjoyable. Also, instead of starting cold, with pyrex all you need do is hold it or put in microwave on warm and then it is ready to go! I highly suggest getting one or perhaps two...they are well worth their price!
Carnus said:
OKay here is a pic of the model I have and Ladies if you are interested on where to get one here is the website address: http://www.passionglass.com
PinkOrchid
Anal Whore™
- Joined
- Oct 29, 2002
- Posts
- 12,582
BlueSugar said:
I was recently fortunate enough to try the curved one I think you are refering to. I myself did not like it, as each of us are proportioned differently, the curved one may not be able to reach the areas within you to give you the orgasm you crave. Were as with the straight model with bumps you can manipulate the wand to the position that you desire and achieve the maxium level of orgasm.
I hope this helps you in your quest for information and the various glass dildo's that are out there.
btw If you don't mind the expense you can actually get a glass or *pyrex glass* dildo cast just for you. then of course what ever design you want will fit you like a hand to a glove.
Carnus
Reality, yours or mine?
- Joined
- Aug 25, 2002
- Posts
- 1,525
edreams said:If you don't mind the expense you can actually get a glass or *pyrex glass* dildo cast just for you. then of course what ever design you want will fit you like a hand to a glove.
Now I wonder, if I were to do that and send them a plaster of paris 'personal' mold could they make one that would be rather umm unique. I am not sure if I would want to do it, that almost sounds like the ultimate in self absorption, but it would be really cool I have to admit.
Carnus
