Wat's Guns-N-Stuff Thread

[HisArpy]

I did a bit of research and came to the same conclusion. Since there's absolutely no hurry, that seems to be the solution.


Merry Xmas!!!

Feliz Navidad.

 

[Wat_Tyler]

Feliz Navidad.

Y feliz año nuevo también.

 

[CuriousRick]

Was at my favorite store yesterday. They have built a custom AR 15 with an attached flame thrower and chainsaw. It was called the Hold my Beer Bundle. Lol

 

[LLCox]

You can have one made.

Saying to myself, 'I can make that" has saved me thousand$ and shown me I really didn't need it after all.

 

[Wat_Tyler]

Saying to myself, 'I can make that" has saved me thousand$ and shown me I really didn't need it after all.

Yeah, but hammer forging a rifle barrel is beyond my skills and my tool collection.

 

[John_von_Neumann]

You need to do one of three things

1). Get a life, make some friends.
2). Get off the internet. You're like an alcoholic.
3). Seek professional counseling to help with your OCD impulses.


Merry Christmas. (I kind of hope that offends you, it would make my day even better.)

Goddamn. I didn't expect you'd be able to take your hypocrisy up another notch, but there it is.

 

[LLCox]

Yeah, but hammer forging a rifle barrel is beyond my skills and my tool collection.

I know, I work with wood so about anything is possible on that level.

 

[Wat_Tyler]

Pretty close, too, for me for the same reasons, but I'd have to engage the Amish to rebuild a wooden spoke wheel.


A man has got to know his limitations . . . .

 

[RoryN]

As a matter of fact the ruling was expected and, actually, celebrated... Rory...Rory...Rory....

Suuuure it was. Thanks for your brimming-with-butthurt response.

 

[LLCox]

Pretty close, too, for me for the same reasons, but I'd have to engage the Amish to rebuild a wooden spoke wheel.


A man has got to know his limitations . . . .

You can flip people out using two steel squares at the same time one over the other..

 

[Rightguide]

What's a Bn2f?

It's not a railroad belonging to Warren Buffet. It stands for Boring News To Follow.

 

[Wat_Tyler]

You can flip people out using two steel squares at the same time one over the other..

I used to lay rafters out using trig. I have used my speed square to figure the not-90* angle so my miter cuts were gnat's ass.

 

[LLCox]

I used to lay rafters out using trig. I have used my speed square to figure the not-90* angle so my miter cuts were gnat's ass.

The speed square is the best thing since sex and I ain't joking. A hot wet pussy and a speed square and I am good to go. Thinking about those double steel squares One of the best book finds of my life I found somewhere called " The carpenters square and it's uses" published in 1889 (second edition). it's in front of me right now and is I'd say eight inches by seven inches, hard bound, with illustration. Besides cuts you mentioned it also solves cuts for hoppers, spring moldings, collar beams, octagons and more. I should be buried with this just in case. I already have orders to put my old Plum 20.oz beside me. I wouldn't all the sudden need it and there only be an old 13.oz Blue Grass laying around.

 

[Bn2f]

It's not a railroad belonging to Warren Buffet. It stands for Boring News To Follow.

Oh, look who else has decided to join in the discussion - another person who addresses me through posting to others.
Theorizing on the meaning and origins of my handle is all yalls got. Have at it.
Wat is a punk ass bitch. Not a responsible gun owner. And, if I did own a gun, I'd be upset that this POS and anyone else who has a restraining order against them is out here giving me a bad name.

 

[Wat_Tyler]

The speed square is the best thing since sex and I ain't joking. A hot wet pussy and a speed square and I am good to go. Thinking about those double steel squares One of the best book finds of my life I found somewhere called " The carpenters square and it's uses" published in 1889 (second edition). it's in front of me right now and is I'd say eight inches by seven inches, hard bound, with illustration. Besides cuts you mentioned it also solves cuts for hoppers, spring moldings, collar beams, octagons and more. I should be buried with this just in case. I already have orders to put my old Plum 20.oz beside me. I wouldn't all the sudden need it and there only be an old 13.oz Blue Grass laying around.

Somewhere in my stuff are 4 volumes of a reprinted series of How-To-type books about all manner of carpentry. It may have had something to do with Fine Homebuilding magazine.I didn't ever have the whole set, which was maybe 12 volumes total. I recall one article reprinted from the revolution-era about the proper proportions for interior moldings for different ceiling heights. There were prescribed proportions. I found it all very interesting, and I have no fucking idea where those books are, or if it would be possible to get the rest of the set.

 

[LLCox]

Somewhere in my stuff are 4 volumes of a reprinted series of How-To-type books about all manner of carpentry. It may have had something to do with Fine Homebuilding magazine.I didn't ever have the whole set, which was maybe 12 volumes total. I recall one article reprinted from the revolution-era about the proper proportions for interior moldings for different ceiling heights. There were prescribed proportions. I found it all very interesting, and I have no fucking idea where those books are, or if it would be possible to get the rest of the set.

Audels, yep I have the paperback set

 

[Wat_Tyler]

Audels, yep I have the paperback set

My bit of it is hardcover reprint. It's got a lot of neat shit.

 

[pezzheaddazzler]

Audels, yep I have the paperback set

One of my first reference books on construction was Basic Construction Techniques for House and Small Buildings by the Bureau of Naval Personnel covers all the construction from foundation to roofing
I've picked up some antique Audels books at used book stores they were unleavable helpful.

 

[Wat_Tyler]

Buildings are gizmos, too.

 

[DroolinFool]

No. Quite the opposite.
I’m a fact based person. I laid out just yesterday the dangers of owning a gun in one’s home. I love my family. I have no unwarranted fear of my neighbors or feelings that my government is coming to get me by means of knocking on my door.

You seriously don't own firearms?

 

[DroolinFool]

In 2021 there were 70,000+ deaths due to synthetic opioids (primarily Fentanyl).

Make it illegal, Librard! Save us! Please!

 

[DroolinFool]

There's great responsibility with owning a gun. A person who owns one should be able to meet the lowest of bars in answering fuckin basic questions and not put forth their argument in memes. You can't do that.

C'mon wat, I'm playing by your rules, your dumbass meme. Should an abused spouse see their armed spouse as a responsible gun owner or a potential criminal?

"

There's great responsibility with owning a gun

" How would you know? You've never owned one. Why would anyone take you advice being a cowardly nobody "Do as I say cause I'm a reddit ninja"? Fuck off with both hands

 

[Bn2f]

You seriously don't own firearms?

Did I stutter when I typed no?

 

[Bn2f]

"

" How would you know? You've never owned one. Why would anyone take you advice being a cowardly nobody "Do as I say cause I'm a reddit ninja"? Fuck off with both hands

You need to avail yourself of the notion that gun ownership is some privileged exclusionary club that can only be criticized from within. I can and will say what I please on gun reform without owning just as you are free to talk about rockets, vaginas without having been in either.

 

[Wat_Tyler]

In passing on the MA ruling, and the pronunciation of words in Engrish spelled the same but meaning other things: MA was the home of the Minnit Men but now has become the home of the My-newt Men . . . .


https://popularedc.com/wp-content/uploads/2022/07/5.jpg