TECH help now please!?

But you forgot one important point. I had her connect the vcr to the tv using the same cable that she is using for the dvd player. She connected it directly from the output jacks(video out), with the RF(coax cables)removed. The outcome was still the same, no signal. Given the fact that the vcr plays fine through an RF connection but not the RCA plugs would suggest the TV is not getting any signal no matter what device the signal originates. She never told me she was using an universal remote, if she is then that is definitely the problem. See the chart for the video setup for zenith tvs.

:D
 
Weird Harold said:
Have you ever hooked a video game to the Aux inputs on your TV? Getting the picture from the DVD should be exactly the same as getting it from video game.

Are you getting any sound? -- Some Zenith TVs have an S-Video input as well as a composite video input that has to be manually switched with a small slide switch near the video inputs. If that's the case with yours you'll get sound but no video.


Go to you TV's setup screen, where you can set channels to be skipped, and make sure that the Aux channel is not disabled. Zenith does NOT assign a channel number to the aux channel so it can be directly addressed. Some Zeniths use an "Input" button on the remote (and front of the television) to select the Aux input, and some put it in the channel scan sequence.

Also, disregard Dillinger's advice -- he's misinterpreted the "Coax" jack on the DVD. The "Coax" jack on the DVD is for Digital video. Unless you have a digital/High definition TV, it's usless. You have the correct connections with the red/white/yellow RCA jacks.

Finally, check the DVD documentation for a selection switch for the output. It may be set to use one of the other outputs exclusively.

Of course, it's entirely possible that you got a DVD that just doesn't work and a replacement will work fine. That is probably the case if you can get a video game or video camera to work with your TV.


Oops.
 
The chart is useless, it says my tv is suppose to switch automatically which it doesnt. My DVD is a Emerson, which I also mentioned AND I also mentioned using a uni remote because I don't have the original tv remote and the other remote I have been using didn't have what I needed to use on it.

No sound either, nothing is working.

I keep getting told that I need to buy a RF modulator adaptor or something like that.
 
Mistress said:
No sound either, nothing is working.

I keep getting told that I need to buy a RF modulator adaptor or something like that.

If you have the audio and video jacks on the television, then you probably don't need an RF adapter. RF adapters are for older televisions that don't have aux inputs.

When you say nothing is working, do you mean you can't get a picture from the VCR either?

It would help if you looked at the back of the television for a data plate with a model number on it. With that, you can look up the user's manual online to find out how to access the Aux input.

PS just for clarification -- the problem is that you can't access the Aux input, correct. Or is the problem that the screen says "Aux" or "Video" where it would show a channel number and there is no picture or sound?
 
Last edited:
The problem is, I'm not getting the movie playing on my tv. The VCR works fine, the DVD player doesnt. The reason I need to RF adapter is because my tv an-tan-na (I cant spell it tonight:p ) screws into the back of my tv witha needle liek thingy. So I can't connect it to my DVD player because it has spots for usb type port thingys, like in the picture Dillenger showed.


And no, it's still not working I havent had a chance to get a ride into town to buy the damn adapter.
 
Back
Top