TECH help now please!?

Do you have more than one set of plugs on the TV? Maybe try them. Make sure the Yellow is in the Yellow slots also.
 
Mistress said:

DVD is a emerson..which btw has no website as far as I know and the tech line has been busy since I got the damn thing home and tried to hook it up. The TV is a Zenith, but that doesn't really matter.

What Model # is the emerson? What model is the Zenith? What kind of input does the Zenith have on the back?
 
Dillinger said:
What Model # is the emerson? What model is the Zenith? What kind of input does the Zenith have on the back?

Emerson is EWD7002


I dont know what my tv is.

And on the back is the red white and yellow plugs just like the plugs on the dvd and I have them both hooked up together. And one spot for my tv cable on teh back of my tv.
 
Great... for starters forget all the colored plugs and just plug the coaxial cable out from the DVD to the coaxial in on your TV - tune your TV to channel 3 (or 4) and see if that works. You can deal with the other cables (and if you need a converter) later.
 
Dillinger said:
Great... for starters forget all the colored plugs and just plug the coaxial cable out from the DVD to the coaxial in on your TV - tune your TV to channel 3 (or 4) and see if that works. You can deal with the other cables (and if you need a converter) later.

coaxial cable?
 
See the coaxial cable out in the picture? Coaxial is the same cable that cable companies use to go from the wall to the back of your TV or VCR or convertor box or whatever. Just unplug the one that's currently going into your TV or the one coming out of the cable on the wall and try it out with your DVD.
 
Dillinger said:
See the coaxial cable out in the picture? Coaxial is the same cable that cable companies use to go from the wall to the back of your TV or VCR or convertor box or whatever. Just unplug the one that's currently going into your TV or the one coming out of the cable on the wall and try it out with your DVD.

It's not the same. It's a long needle that screws into the back of my tv.
 
try channel 00 on your TV. You cant 'flip' to it, you need to press 00

good luck
 
JerseyBoy said:
try channel 00 on your TV. You cant 'flip' to it, you need to press 00

good luck

automatically flips to channel 2
 
The other end of that long needle should be able to go into the DVD - sometimes they're screw ins - sometimes they just slip in - you need a cable that just slips in. They're only a couple dollars at radio shack. This will at least prove if your DVD works. ]

You could also try taking it over to a friends house and see if it works with their TV.

What other inputs does your TV have? The number one best choice for picture quality is actually the S-Video option. If your TV has S-Video in then you want to buy an S-Video cable - available in most electronics stores, Wal Mart, Circuit City, radio shack - etc. You can actually spend more on these various cables than the DVD player cost you. But for now - just buy the cheapest one they have if you want (though, if you can, go for gold plated).

If your TV does have an S-Video input then check the manual that came with the TV and see if there is a particular setting you have to use to activate S-Video.

If no S-Video then go for the Yellow Video output. That IS NOT an RCA output even though it looks like one. You need a Video cable - available at the same places. Make sure it goes to the Video in of the TV. Audio out l/r, of course goes to audio in l/r.
 
Dillinger said:
The other end of that long needle should be able to go into the DVD - sometimes they're screw ins - sometimes they just slip in - you need a cable that just slips in. They're only a couple dollars at radio shack. This will at least prove if your DVD works. ]

You could also try taking it over to a friends house and see if it works with their TV.

What other inputs does your TV have? The number one best choice for picture quality is actually the S-Video option. If your TV has S-Video in then you want to buy an S-Video cable - available in most electronics stores, Wal Mart, Circuit City, radio shack - etc. You can actually spend more on these various cables than the DVD player cost you. But for now - just buy the cheapest one they have if you want (though, if you can, go for gold plated).

If your TV does have an S-Video input then check the manual that came with the TV and see if there is a particular setting you have to use to activate S-Video.

If no S-Video then go for the Yellow Video output. That IS NOT an RCA output even though it looks like one. You need a Video cable - available at the same places. Make sure it goes to the Video in of the TV. Audio out l/r, of course goes to audio in l/r.

I give up...damn things going back tomorrow. Though I"m out on the money I spent on dvds
 
Mistress said:
automatically flips to channel 2
when you press 0 and 0 on your remote it goes back to channel 2? that's wierd...

are there any controls on your TV? Maybe a 'video/input' button?

try pluging the DVD into your VCR. Put the TV on channel 3 as usual. The VCR should have a 'video' button or you should be able to flip down below channel 2 to get the the video channels
 
You could always ask someone where you bought it what to do.

If not - ah well, you tried.

If you go buy your next one at an electronics store they might walk you through how to set it up.

And, again, there's always the 9 year old neighbor.
 
JerseyBoy said:
when you press 0 and 0 on your remote it goes back to channel 2? that's wierd...

are there any controls on your TV? Maybe a 'video/input' button?

try pluging the DVD into your VCR. Put the TV on channel 3 as usual. The VCR should have a 'video' button or you should be able to flip down below channel 2 to get the the video channels

nope
 
Dillinger said:
You could always ask someone where you bought it what to do.

If not - ah well, you tried.

If you go buy your next one at an electronics store they might walk you through how to set it up.

And, again, there's always the 9 year old neighbor.

No one knew..tried that shit already. RADIO SHACK didnt even know.
 
if you hold the DVD's up to the light you can sometimes see some frames from the movie...j/k

punt!
 
JerseyBoy said:
if you hold the DVD's up to the light you can sometimes see some frames from the movie...j/k

punt!

Your not funny and if you were here right now, I'd whack you with the piece of shit dvd player.
 
Mistress said:
Your not funny and if you were here right now, I'd whack you with the piece of shit dvd player.
isnt there supposed to be a smiley after that? i thought there'd be a smiley...if there's no smiley then, well, umm

Run!

sorry bout your problems...it just seems you cant get to the right channel on your TV...there has to be a 'video/aux' channel somewhere...got a brand name/model of the TV?

we aims to please...
 
Mistress said:
I dont know what my tv is.

And on the back is the red white and yellow plugs just like the plugs on the dvd and I have them both hooked up together. And one spot for my tv cable on the back of my tv.

Have you ever hooked a video game to the Aux inputs on your TV? Getting the picture from the DVD should be exactly the same as getting it from video game.

Are you getting any sound? -- Some Zenith TVs have an S-Video input as well as a composite video input that has to be manually switched with a small slide switch near the video inputs. If that's the case with yours you'll get sound but no video.


Go to you TV's setup screen, where you can set channels to be skipped, and make sure that the Aux channel is not disabled. Zenith does NOT assign a channel number to the aux channel so it can be directly addressed. Some Zeniths use an "Input" button on the remote (and front of the television) to select the Aux input, and some put it in the channel scan sequence.

Also, disregard Dillinger's advice -- he's misinterpreted the "Coax" jack on the DVD. The "Coax" jack on the DVD is for Digital video. Unless you have a digital/High definition TV, it's usless. You have the correct connections with the red/white/yellow RCA jacks.

Finally, check the DVD documentation for a selection switch for the output. It may be set to use one of the other outputs exclusively.

Of course, it's entirely possible that you got a DVD that just doesn't work and a replacement will work fine. That is probably the case if you can get a video game or video camera to work with your TV.
 
someone help me out here. I have deleted all messages in my inbox and yet people say they cant send me pm's.
Can the mods save my sanity?
 
Guys her tv and vcr are both zenith.....I know my 13" zenith has a tv a/v button on the remote. How else can she switch the signal other than through the remote, or a video 1 or video 2 channel (my magnavox has a video 1 or video 2 channel prior to the very first channel which is channel 2. Any ideas? I am convinced the problem is with her TV.

:D
 
ridddder said:
I know my 13" zenith has a tv a/v button on the remote.

If you read the complete thread, you'd note she's using a universal remote and the TV/AV button doesn't work on her TV.

It could be the universal remote is set wrong for her model Zenith, but I'm leaning to the belief that she got a DVD with a bad output stage.
 
Back
Top