shite

Bollocks.

Also, the dog's bollocks which means the total opposite.
 
do you know the history of that?
it's literally hundreds of years of traditional insult.
or so they say...


Ever tried to draw a longbow?

Word: don't.


They say the damn things will dislocate your shoulder. It has been estimated that the ones found on the Mary Rose took over 150 pounds to draw.


 
Ever tried to draw a longbow?

Word: don't.


They say the damn things will dislocate your shoulder. It has been estimated that the ones found on the Mary Rose took over 150 pounds to draw.
It had to.

That was an arrow that could pierce armor.
 

Ever tried to draw a longbow?

Word: don't.


They say the damn things will dislocate your shoulder. It has been estimated that the ones found on the Mary Rose took over 150 pounds to draw.



yes. my shoulder was fine.

not all longbows are that heavy though.
 
yes. my shoulder was fine.

not all longbows are that heavy though.
He's talking about pull, not weight.

And, to be honest, I'm not sure you could pierce the armor of a random poofter Frenchman.
 
totty

chavette (aside: I much prefer chav to yob[bo] - good call, guys)

Also, I just googled top totty and discovered that it has an eponymous beer that was banned from the House of Common for being offensive to female MPs. Haha! Silly bints.

I think I would like Geordie slang if I could understand a single word of it.
 
Bows are awesome. Didn't the ice man have arrows with like, spiralled feathers to help it fly straight? Clevahh.

I heard a similar backstory once about the American-popular middle finger. Same basic idea, but with your trigger finger. Didn't really make sense. I looked into it later; apparently it's an ancient Roman phallic gesture.

Amurrica: into dick humour since before Jesus.
 
Amurrica: into dick humour since before Jesus.
Oh, and where the fook did that come from, eh?

From Scots and the bloody English, wavin' their private parts at each other across the hills...

America is England's bastard. That's England's legacy to the world.

Accept it, or kill yourselves. The lot of ya.
 

Ever tried to draw a longbow?

Word: don't.


They say the damn things will dislocate your shoulder. It has been estimated that the ones found on the Mary Rose took over 150 pounds to draw.



Back in the early 1960s, long before the Mary Rose was raised, I and a friend made longbows with the information we could obtain at the time.

We had unofficial access to the resources of a Royal Dockyard, and some suitable yew staves.

We made two. His had a draw weight of 110 lbs; mine was 180 lbs.

With a greased pointed steel head at a distance of 30 yards, my bow could pierce six inches of seasoned oak; his four inches. Both bows would fire arrows right through 1/4 mild steel, ripping off the fletching. Mine would do the same with 1/4 steel plate. His would pass through most times.

We weren't satisfied until we had constructed a crossbow as well. We used a car's spring and a hand windlass rated to 1000lbs. Our bolts were sharpened steel rods with welded flights. That crossbow, we only made one, had a useable draw weight of 300 to 350 lbs. We could crank it to a higher level but the trigger mechanism couldn't cope.

The crossbow's bolts pierced everything we tried including some one inch armour plate but then our superiors objected to us firing dangerous weapons in the Dockyard and our experiments had to end.

With the heavy drawweights of the longbow, and the jarring of the crossbow's release mechanism on firing, we found that accuracy was almost impossible. Perhaps we could have achieved accuracy with more practice, but repeated drawing of the 180 lb pull was tiring after only half an hour. The archers at Agincourt and Crecy kept shooting for hours...
 
Oh, and where the fook did that come from, eh?

From Scots and the bloody English, wavin' their private parts at each other across the hills...

America is England's bastard. That's England's legacy to the world.

Accept it, or kill yourselves. The lot of ya.

Dinnae make me Braveheart you!

Back in the early 1960s, long before the Mary Rose was raised, I and a friend made longbows with the information we could obtain at the time.

We had unofficial access to the resources of a Royal Dockyard, and some suitable yew staves.

We made two. His had a draw weight of 110 lbs; mine was 180 lbs.

With a greased pointed steel head at a distance of 30 yards, my bow could pierce six inches of seasoned oak; his four inches. Both bows would fire arrows right through 1/4 mild steel, ripping off the fletching. Mine would do the same with 1/4 steel plate. His would pass through most times.

We weren't satisfied until we had constructed a crossbow as well. We used a car's spring and a hand windlass rated to 1000lbs. Our bolts were sharpened steel rods with welded flights. That crossbow, we only made one, had a useable draw weight of 300 to 350 lbs. We could crank it to a higher level but the trigger mechanism couldn't cope.

The crossbow's bolts pierced everything we tried including some one inch armour plate but then our superiors objected to us firing dangerous weapons in the Dockyard and our experiments had to end.

With the heavy drawweights of the longbow, and the jarring of the crossbow's release mechanism on firing, we found that accuracy was almost impossible. Perhaps we could have achieved accuracy with more practice, but repeated drawing of the 180 lb pull was tiring after only half an hour. The archers at Agincourt and Crecy kept shooting for hours...

This is amazing! You are awesome.
 
He's talking about pull, not weight.

And, to be honest, I'm not sure you could pierce the armor of a random poofter Frenchman.

yes. i know. on account of not being a complete fucking moron.

don't be such a patronising twat.
 
I just took a healthy shite.

You're right dolf baby. It is an awesome word.

I have now added shite to my vocabulary but I refuse to call people git. That is just to weird.
 
Back
Top