Cock or Penis rings

[gemdave]

I am considering trying these, any useful help thoughts tips ot experience will be much appreciated

 

[jehoram]

I am considering trying these, any useful help thoughts tips ot experience will be much appreciated

There are quite a few threads on this already. A search will turn them up. Be advised that you want to limit it to either this forum or the "Fetish" forum, or you'll get a zillion useless hits.

 

[JiminNC]

Just go down to the local hardware store and get a brass ring or two of a couple sizes and see what fits. I have a 2” that nicely fits around my nut sac and cock.
I also fabricated a cage of three different sized rings… the 2”, a 1-1/2” for the vas deferens, and a 1-1/4” for base of my cock. Easy to solder together with a home torch. (Sizes are from memory.) I bought a “one size fits all” kit from the local porn shop to try out, but the erection popped it apart! Hence metal.
Nuts always first, then squeeze the lubricated cock through.
Gets you harder than ever, and remain hard for a while after cumming.
Careful to avoid twisting a testicle, else you’ll be at the ER in no time! Good luck!

 

[yukonnights]

IMO, a good beginner ring would be the ones made from surgical tubing threaded through a large glass/plastic bead to keep it snug. Much easier to use and no danger of visiting the ER

 

[rae121452]

leather cock ring with velcro. nothing better. i also had what was called a 4 speed, leather with four different snap closures. it was really good, unfortunately i gave it to an ex- virgin after i fucked him.

 

[Nadinet]

I have a heavy stainless steel ring that goes over my balls, its in 2 pieces and screws together, i love wearing it

 

[falkor207]

After finding Lit I've discovered a lot of new interests. This summer/fall I spent time reading forum thread comments and bought my 1st cock ring. It was a rubber compound with very little stretch, but gave some piece of mind. This also helped narrow down what size I would look for in a fixed size ring. A month later I bought my first metal ring, nothing special, just a fixed size and better fit than the rubber one. A few months of that and I'm searching again. I bought a nice ring from Gear Essentials. Love it! Do your research and ask questions, if you still like the idea then go for it. Stay safe and enjoy.

 

[gtnlynn]

I found some narrow velcro straps long enough to circle my erect penis. The velcro makes it easy to adjust and remove. It's washable and cheap. Plus, you get a variety of colors.

 

[biwm58]

Large, thick "O" rings

I work in the stockroom at work. I noticed in one of the drawers a conglomeration of different sizes and thicknesses of O rings. From 1/16" thin and 6" ID to 3/16" thick and 1" ID.
I am small, both dick and balls, so I chose a thick ring and 2" ID which turned out to be too big. I then went with a 1 3/4" ID and later to a 1 5/8" ID. *That* one feels snug and keeps me erect.