h_i_s
Literotica Guru
- Joined
- Jan 17, 2004
- Posts
- 4,335
Had this request for help buried in another thread ... figured, what theheck .. i'll post it here, maybe someone who knows, can offer assistance/suggestions/solutions etc ect.
If it helps .... this is what i have done so far (i think
) & this is where i am at right now:
Pri Master=MAXTOR 6Y080P0 Ultra DMA Mode-5, S.M.A.R.T. Capable and enabled
Pri Slave=Quantum Fireball1ct20 20 Ultra DMA Mode-5, S.M.A.R.T. Capable and enabled
Sec Master=CDROM
Sec Slave=CDROM
Hard Drive 1: Int 13h Drive Number 80h, controlled by EZ BIOS, cylinders 9965, heads 255, sectors 63, capacity 81GB, multi-sector transfer 16 sector, 32-bit transfer enabled(i think), floppy boot protection enabled, logical block address enabled, 'no' for 63-sector data offset.
Hard Drive 2: Int 13h Drive Number 81h, controlled by ROM BIOS, cylinders 1025, heads 255, sectors 63, capacity 8423MB
From here i THOUGHT i had installed an orginal XP factory/complete reformat ... but the Cds
turned out to be 'XP's system recovery'... INSIDEYOURMIND can't find/or remember where His full XP Cds are. ... but was attempting to 'locate' them by other means earlier .... He had to step out... i may be all set with them & have them here when He returns.
OK, so ... now my PC, when started in safe mde, and trying to get the pc to start XP windows, i get an error:
Windows could not start because the following file is missing or corrupt
\WINDOWS\system32\config\SYSTEM
Attempt to repair by starting Windows Setup using original Setup CD-ROM.
Select "r" at the first screen to start repair.
i'd only be GUESSING at how to fix this ... .
Does it NEED to be from an XP Setup CD-ROM ??
OR
Can i use the backup of the system folder of files i saved from my WIN 2000 Pro and burned to CD?? -- Does it MATTER which OS the SYSTEM files are from??
Would i even be able to get the PC to install/save or 'grab up' the files if i insert them
in the CDROM player .... and direct the PC to boot from C:?? i dunno ... and as i said, i'm just guessing at the solution at this point.
Greatly appreciativvvvvvvve to anyone who knows the answer/solution etc ect.my next stop is GOOGLE .. Sometimes the solution is as simple as searching the exact error ... and hoping i have replicated an issue that someone else out there has experienced and provided a solution for ..
Thanks ....
If it helps .... this is what i have done so far (i think
Pri Master=MAXTOR 6Y080P0 Ultra DMA Mode-5, S.M.A.R.T. Capable and enabled
Pri Slave=Quantum Fireball1ct20 20 Ultra DMA Mode-5, S.M.A.R.T. Capable and enabled
Sec Master=CDROM
Sec Slave=CDROM
Hard Drive 1: Int 13h Drive Number 80h, controlled by EZ BIOS, cylinders 9965, heads 255, sectors 63, capacity 81GB, multi-sector transfer 16 sector, 32-bit transfer enabled(i think), floppy boot protection enabled, logical block address enabled, 'no' for 63-sector data offset.
Hard Drive 2: Int 13h Drive Number 81h, controlled by ROM BIOS, cylinders 1025, heads 255, sectors 63, capacity 8423MB
From here i THOUGHT i had installed an orginal XP factory/complete reformat ... but the Cds
turned out to be 'XP's system recovery'... INSIDEYOURMIND can't find/or remember where His full XP Cds are. ... but was attempting to 'locate' them by other means earlier .... He had to step out... i may be all set with them & have them here when He returns.
OK, so ... now my PC, when started in safe mde, and trying to get the pc to start XP windows, i get an error:
Windows could not start because the following file is missing or corrupt
\WINDOWS\system32\config\SYSTEM
Attempt to repair by starting Windows Setup using original Setup CD-ROM.
Select "r" at the first screen to start repair.
i'd only be GUESSING at how to fix this ... .
Does it NEED to be from an XP Setup CD-ROM ??
OR
Can i use the backup of the system folder of files i saved from my WIN 2000 Pro and burned to CD?? -- Does it MATTER which OS the SYSTEM files are from??
Would i even be able to get the PC to install/save or 'grab up' the files if i insert them
in the CDROM player .... and direct the PC to boot from C:?? i dunno ... and as i said, i'm just guessing at the solution at this point.
Greatly appreciativvvvvvvve to anyone who knows the answer/solution etc ect.my next stop is GOOGLE .. Sometimes the solution is as simple as searching the exact error ... and hoping i have replicated an issue that someone else out there has experienced and provided a solution for ..
Thanks ....
