More Computer help please

Kitte

¤weary¤
Joined
Feb 19, 2002
Posts
7,784
I am trying to defrag my hard drive and it keeps sticking at 18%
What would cause this?

Should I be worried?

Damn PC.

Thanks!
 
Make sure you have everything turned off that doesn't need to be running. Do this by clicking on CTL ALT DEL.
Don't be connected to the net.. don't touch the keyboard or the mouse. Run a scandisc first.. then after that run defrag.
 
freakygurl said:
Make sure you have everything turned off that doesn't need to be running. Do this by clicking on CTL ALT DEL.
Don't be connected to the net.. don't touch the keyboard or the mouse. Run a scandisc first.. then after that run defrag.

Will try that. I am always connected to the net but I will try...should I mention now I always have a problem doing scandisk...we will see thanks freaky!
 
My understanding was it was best to run defrag when not connected to the net..

And why are you having problems running scan disk? Maybe HS is right.. maybe the HD is bad.
 
I was incorrect....

You can use the computer while doing a defrag.

"When programs are installed on your computer, the program's files can be broken up over different locations on your hard drive. This is called fragmentation. If fragmentation occurs on your hard drive, the performance on your computer is slower. The Disk Defragmenter locates and consolidates fragmented boot files, data files and folders on local volumes. It also optimizes the performance of your computer by reorganizing the files. When the Disk Defragmenter tool completes the defragmentation of files on your hard disk, the performance of your programs are faster because the files are arranged closer together.

NOTE: You can use your computer while Disk Defragmenter is running. However, your computer will operate slower and the defragmentation process restarts if the contents of the drive you are defragmenting changes. You should stop all programs running including your screen saver."
 
Kitte said:
I am trying to defrag my hard drive and it keeps sticking at 18%
What would cause this?
It could be hitting a problem area in the file system at this point. I suggest you run a file system diagnostic before running defrag again.

Should I be worried?
Not necessarily. You do backup important files periodically don't you?
 
Everything else seems to be working just fine other then some RAM issues. I defrag'd only about a week ago. I was just sort of doing it well to do it. I did a scan disk (standerd not through) and it said everything was fine. Tried rebooting and defraging again and it still got stuck at 18%

How do I do the system diagnostics? I am running windows ME.

I appreciate all the help.
 
Kitte said:
Everything else seems to be working just fine other then some RAM issues. I defrag'd only about a week ago. I was just sort of doing it well to do it. I did a scan disk (standerd not through) and it said everything was fine. Tried rebooting and defraging again and it still got stuck at 18%

How do I do the system diagnostics? I am running windows ME.
Sorry, I used the terminology "file system diagnostics" as a general reference to something like Scandisk (I don't believe it is called that in NT). Even though you have already run Scandisk I still suspect something wrong with the file system - but I suppose it could be your RAM problem too, but if it were a RAM problem it probably wouldn't always stop in the same exact spot (programs rarely load into memory in the same exact way and place every time). Alternatively maybe Defrag is corrupt or running out of memory at that point.

Sorry I couldn't help more.
 
Kitte said:
Everything else seems to be working just fine other then some RAM issues. I defrag'd only about a week ago. I was just sort of doing it well to do it. I did a scan disk (standerd not through) and it said everything was fine. Tried rebooting and defraging again and it still got stuck at 18%

Clean up your disk by deleteing temporary internet files, temp files, and any FILExxxx.CHK files that scndisk has left behind.

Run Scandisk in thorough (surface scan mode.) (set it to free lost clusters instead of converting them to FILExxxx.CHK.)

Reboot into SafeMode by holding down the control key while the system boots to get the boot menu.

Run defrag.
 
Back
Top