millwrights

Neither do I. On the plus side its 2 dollars more then my current hourly wage, and will ne double what I make now when I get a journeymans card. If work is spotty though it doesnt seem worth it. Im torn
 
Neither do I. On the plus side its 2 dollars more then my current hourly wage, and will ne double what I make now when I get a journeymans card. If work is spotty though it doesnt seem worth it. Im torn

Do it and then make sure you get all the welding certs you can get and be willing to go to Canada.

It's one of those small cliquey trades. I worked with a defrocked millwright who was super bitter about the fact that he was never part of the in-group that learned the really cool stuff like how to set turbines.
 
One summer when I was in high school I worked at a strip mine. I didn't like having to take my clothes off though.
 
Do it and then make sure you get all the welding certs you can get and be willing to go to Canada.

It's one of those small cliquey trades. I worked with a defrocked millwright who was super bitter about the fact that he was never part of the in-group that learned the really cool stuff like how to set turbines.

I thought about that. This local goes as far south as Toledon Ohio and as far north as Lansing. They didnt say anything about Canada but Windsor is only a river away so I dont see why not. I figured I would try to specialize in robots and shit. Assembly robotd are a big thing around here.
 
I have done machinery installations for over 35 years. I hire a lot of Millwrights all the time for projects all over the world. I will say, there are fewer and fewer young people going into the industry. If I had to guess, it would be a good field going forward, as the older folks retire, there will be more jobs with fewer qualified people. Its the ole supply and demand thing, the wages should go up for qualified millwrights. Two weeks ago I hired a Rigging/Millwright crew in CT, last week I hired a crew in NC and right now I am working on hiring a crew in China.
 
I have done machinery installations for over 35 years. I hire a lot of Millwrights all the time for projects all over the world. I will say, there are fewer and fewer young people going into the industry. If I had to guess, it would be a good field going forward, as the older folks retire, there will be more jobs with fewer qualified people. Its the ole supply and demand thing, the wages should go up for qualified millwrights. Two weeks ago I hired a Rigging/Millwright crew in CT, last week I hired a crew in NC and right now I am working on hiring a crew in China.

Thats true. No one wants to get dirty anymore. I wonder if maybe the lady is trying to scare people off...a first test so to speak
 
I've got my Tool & Die ticket and ended up focusing on PLC's and manufacturing lines (robots & shit). If you don't mind relocating every few years, moving to where there's lot's of cabbage, not only will you never be out of work but will actually have a set of marketable skills instead of just "a job".

Good if you are mechanically inclined and don't want to be an office drone.

Not so good if you are only looking to clock in & out and pick up a pay cheque.

Unless you land yourself in a lucky niche a millwright will be spotty work and constantly uprooting yourself every few years. Unless you focus on some real specific careers and end up working turbine's in the same power plant or aircraft assembly line for a few decades.

Not feeling the greatest right now but any question you might have just leave it here and I'll get back to it in detail. But in a nutshell I am 40 and pretty much semi-retired right now and only picking up the odd short term contract to keep the coffer's topped up. Millwright is one of those trades where you can earn $16-$18/hr and be laid off three or four months of the year or banking $80k+ annually, it is a pretty wide field depending on what you focus on and what part of the country you are in.
 
I've got my Tool & Die ticket and ended up focusing on PLC's and manufacturing lines (robots & shit). If you don't mind relocating every few years, moving to where there's lot's of cabbage, not only will you never be out of work but will actually have a set of marketable skills instead of just "a job".

Good if you are mechanically inclined and don't want to be an office drone.

Not so good if you are only looking to clock in & out and pick up a pay cheque.

Unless you land yourself in a lucky niche a millwright will be spotty work and constantly uprooting yourself every few years. Unless you focus on some real specific careers and end up working turbine's in the same power plant or aircraft assembly line for a few decades.

Not feeling the greatest right now but any question you might have just leave it here and I'll get back to it in detail. But in a nutshell I am 40 and pretty much semi-retired right now and only picking up the odd short term contract to keep the coffer's topped up. Millwright is one of those trades where you can earn $16-$18/hr and be laid off three or four months of the year or banking $80k+ annually, it is a pretty wide field depending on what you focus on and what part of the country you are in.

Like I said before im in southeast michigan. Around here there is a plant on every corner. This school told me id start out as an apprantice at about 17 an hour and be between 30 to 35 when I have my card. Im torn mostly because I dont want to give up a 15 an hour job with damn good benifits for what might possibly be a great career. Ya I need to learn a skill. Offices arent for me. At the same time, I cant afford to work say 10 hours a week. I was told in my current plant that there is a two year wait to get a press installed right now so that makes me think there is a lot of work right now. Are there any benifits if you work though a union bidding on contracts and such?
 
Last edited:
Neither do I. On the plus side its 2 dollars more then my current hourly wage, and will ne double what I make now when I get a journeymans card. If work is spotty though it doesnt seem worth it. Im torn

You only get paid, when you're working.

There's plenty of jobs out there (at least, around here) for skilled hands, you just have to travel to where the work is. And of course, have a skill. There are a few voc-ed schools here that train folk for oil patch work. If you can handle the hours and not fuck up your life on the time off, it's a good living.
 
You only get paid, when you're working.

There's plenty of jobs out there (at least, around here) for skilled hands, you just have to travel to where the work is. And of course, have a skill. There are a few voc-ed schools here that train folk for oil patch work. If you can handle the hours and not fuck up your life on the time off, it's a good living.

I figured as much. Skilled work seems plenty around here too. The auto guys contract just about everything out now if its more then simple maintinance.
 
Do it and then make sure you get all the welding certs you can get and be willing to go to Canada.

It's one of those small cliquey trades. I worked with a defrocked millwright who was super bitter about the fact that he was never part of the in-group that learned the really cool stuff like how to set turbines.

There are some big mines coming on in eastern Canada that are so big, the Canadian Government doesn't know where the workers to build them will come from.
 
Like I said, get your welding tickets. THey'll give you at least a solid year of welding in apprentice school, then go from there. That will pay the bills between millwright gigs.
 
Like I said, get your welding tickets. THey'll give you at least a solid year of welding in apprentice school, then go from there. That will pay the bills between millwright gigs.

Sounds like a plan. Arent welding jobs just as spotty?
 
we wear canvas and leather
and work in shitty weather
if we only had a brain

do do doo do do do doo do do do do do do do doo do

if we only had a brain
 
Those guys are in a warm cab.

If you're a good enough pipe welder, you'll get a hooch.

Depending on how my test goes im going to see if my boss will let me work part time during the apprenticeship if things are slow. That way I keep my health insurance
 
Back
Top