Knives

get a $6.00 sharpening stone from home depot or what not and use that.
then buy a $30-80 good honing steel and use that frecuently (before and after each use) on your knives
after that youll only have to use the $6.00 stone once every 5 years or so.

this will only work on solid straight edged knives.. if you have a serrated one your screwed. Buy a new one.

Oh and when you are buying knives go for the good ones...
avoid the faberware/ toys r us crap. riveted handles, good balance and a solid blade are always a must.


Trust me im a chef by trade.
 
Unregistered said:
get a $6.00 sharpening stone from home depot or what not and use that.
then buy a $30-80 good honing steel and use that frecuently (before and after each use) on your knives
after that youll only have to use the $6.00 stone once every 5 years or so.

this will only work on solid straight edged knives.. if you have a serrated one your screwed. Buy a new one.

Oh and when you are buying knives go for the good ones...
avoid the faberware/ toys r us crap. riveted handles, good balance and a solid blade are always a must.


Trust me im a chef by trade.

Thanks! :)
 
Unregistered said:
get a $6.00 sharpening stone from home depot or what not and use that.
then buy a $30-80 good honing steel and use that frecuently (before and after each use) on your knives
after that youll only have to use the $6.00 stone once every 5 years or so.

this will only work on solid straight edged knives.. if you have a serrated one your screwed. Buy a new one.

Oh and when you are buying knives go for the good ones...
avoid the faberware/ toys r us crap. riveted handles, good balance and a solid blade are always a must.


Trust me im a chef by trade.
i agree with what you said but me personally i prefer to use a diamond whetstone and diamond steel ,initial out lay is expensive but they really puta good edge on a knife blade and the steel keeps it that way
 
<grin> blah blah blah, great ideas everyone.

I use the back of one knife to sharpen the blade of another, when I need a quick fix.

Get a steel, a diamond one is special and the best, but whatever ya don't NEED it.

The stone, is okay, if you get the three surfaces. Think of it as sandpaper. You start with the roughest surface, then the medium, then down to the extra fine. Unless you have practice honing knives, I'd get a pro to do it, because you might be off on your angles which causes a lip to form on your edge, resulting in dullness.

Always remember to do an even number of strokes on each side to stop this from happening.

For the average household that had just a normal blade<not serrated> a honing steel will be enough for your needs. Why the fuck does anyone need to cut paper with a blade? Use your goddamn scissors, freaks. <grin>
 
perky_baby said:
Why the fuck does anyone need to cut paper with a blade? Use your goddamn scissors, freaks. <grin>

LOL A knife isn't really sharp unless you can split a hair with it using only the weight of the hair and gravity.
 
RawHumor said:
LOL A knife isn't really sharp unless you can split a hair with it using only the weight of the hair and gravity.
really? really and truly?

This totally reminds me of culinary school when the boys used to see who's knife was sharper.

It's still amusing.
 
perky_baby said:
This totally reminds me of culinary school when the boys used to see who's knife was sharper.

How very Freudian of them.
 
ok, the system you have is probably about the best system for a beginner to use. the one with the board or plastic bit that hold the two sticks up in a V shape, yes? those are crock sticks, not to be confused with cock sticks.

first off, what's the brand of the system you're using? was it a cheap little thing you bought at Wal*Mart?
 
oh yeah, i work at a knife store up here in Alaska that is owned by a master-grade knifesmith. while i can't describe the best technique for sharpening in great detail (i have my boss do my sharpening), i can tell you what brand of sharpeners are good, and direct you away from bad ones.
 
Back
Top