How to use cock rings?

[Smal3hard5cfnm]

Hello I would like to know how to use cock rings to stay hard for hours.

Anny advice on types buying and getting the right size please.

 

[jehoram]

Hello I would like to know how to use cock rings to stay hard for hours.

Anny advice on types buying and getting the right size please.

I don't use them to stay "hard for hours." I'm not sure that's a good thing. At my age, I'm happy with it giving me twenty minutes or so.

As for sizing, it depends on what you're doing with them ... cock only, or cock and balls. Either way, you'll just have to experiment, although getting one of those tape measures that tailors use will get you pretty close.

I found a large assortment at my local hardware store, but they don't allow testing on the premises. (Now they have my picture by the register, so I don't go there anymore.)

 

[box13]

(Now they have my picture by the register, so I don't go there anymore.)

Well that's too bad. I think more hardware stores need to understand the needs of proper fit before that kind of investment, down by the 'ol o-ring assortment box. I've certainly seen a few sales clerks that could be very helpful, too.

 

[hpycpl]

I don't use them to stay "hard for hours." I'm not sure that's a good thing. At my age, I'm happy with it giving me twenty minutes or so.

As for sizing, it depends on what you're doing with them ... cock only, or cock and balls. Either way, you'll just have to experiment, although getting one of those tape measures that tailors use will get you pretty close.

I found a large assortment at my local hardware store, but they don't allow testing on the premises. (Now they have my picture by the register, so I don't go there anymore.)

This post got me thinking.

Am I to understand that you can use a simple general use o-ring (provided it is the right size) that you find in any hardware store?

If that is so then why not just buy one of the assortment boxes and "size" yourself in the privacy of your own home? They are very inexpensive.

 

[Stillrandy]

This is what I use

https://cdn09.bdsmlr.com/uploads/photos/2019/10/1092892/bdsmlr-1092892-3NVmetH9w2.PNG

They refer to the ring as a 'constriction ring'. When you turn the sleeve on the end of the vacuum tube, the ring slips onto the base of the penis. Very handy and works very well.

 

[ElectricBlue]

This post got me thinking.

Am I to understand that you can use a simple general use o-ring (provided it is the right size) that you find in any hardware store?

If that is so then why not just buy one of the assortment boxes and "size" yourself in the privacy of your own home? They are very inexpensive.

Christonabike. You buy plumbing equipment at a hardware store, the purpose being to stop leaks for ten years. Your cock is not a hose pipe, so buy something fit for purpose. And if you don't know what you're doing (I'm not convinced the OP does) don't do it. Constriction can damage your tool if you're not careful.

Jehoram, you've got to stop fucking with people. You've got jokers here taking you seriously!

 

[Bigspurt]

Size and Availability

I have put this on another thread. When I decided to try out a cock ring I found an industrial "O" ring supply warehouse. I bought a pack of 35.

Supplier, ***O-ring Warehouse is a division of Parco, Inc. http://www.parcoinc.com/

Here is the chart for every size "O" ring on earth. Pick the size and then the material. http://www.parcoinc.com/products/o-rings/o-ring-size-chart/

The ones I bought have little to no stretch.

Size Material No. of Pieces Price Each Subtotal
-328 70-durometer Silicone, Red, FDA
Compound: 1200-70 35 $0.29 $10.15
Subtotal $10.15
Shipping $5.30
Order Total $15.45

To decipher #328 is the ID # for this size ring (see chart). 3/16 diameter and 1 7/8 ID.
7-durometer Silicone, Compound: 1200-70, Red, FDA indicates the material and that they are FDA approved for food systems.

0.29 cents each plus shipping = $15.45

I was pretty sure on the size. I have one smaller and the challenge is getting your second ball through the ring. I also have a 2" ID steel ring from a hardware store that works well too.

 

[jehoram]

Jehoram, you've got to stop fucking with people. You've got jokers here taking you seriously!

Well, I was serious about buying a cock ring at a hardware store. I really did that. In fact, I bought several. Started out getting one that was way too big, and worked down from there to one that did the job without interfering with circulation. I have two sizes now: the one that just slips onto the cock, and the one that encompasses the cock and scrotum. Neither of them causes the cock to darken in shade or otherwise indicate that there was undue constriction of blood flow.

Granted, I did all this twenty-five years ago, before there was an Internet in my part of the world, but I don't see how this approach is any different from what you'd have to do to shop on-line.

And I was also serious about the longevity. The longer the blood flow is restricted, the more damage is likely to result. Based on more experiments than I care to think about now, I determined that, for me, limiting it to twenty minutes or so provided a sufficient safety factor. At least, neither I or my urologist has diagnosed permanent damage. And this, of course, is true for any cock ring, whether bought at a hardware store or online. The buyer must surely beware.

You're right that this is something that has to be approached with caution. I wouldn't want somebody to start out with something that was far to small, and ending up with damage to their most precious appendage. That's why I described the proper way to size yourself, right there at the top of this post.

I WAS kidding about the photo, of course.

 

[ElectricBlue]

And I was also serious about the longevity. The longer the blood flow is restricted, the more damage is likely to result. Based on more experiments than I care to think about now, I determined that, for me, limiting it to twenty minutes or so provided a sufficient safety factor. At least, neither I or my urologist has diagnosed permanent damage. And this, of course, is true for any cock ring, whether bought at a hardware store or online. The buyer must surely beware.

You're right that this is something that has to be approached with caution. I wouldn't want somebody to start out with something that was far to small, and ending up with damage to their most precious appendage. That's why I described the proper way to size yourself, right there at the top of this post.

I WAS kidding about the photo, of course.

Absolutely, proceed with caution!

Maybe it's different where you are, but in my city there are probably as many sex shops as there are hardware stores, which is why buying "fit for purpose" isn't at all difficult.

The inflatable doll range in the hardware stores is smaller, though .

 

[guns444]

I bought a simple silicone ring off eBay. I put it on and keeps me hard for a few hours while I edge. Absolutely love it. But I think you need to build up your time you keep it on over a few sessions, because it can get painful when you first start

 

[Smoothshavendad]

I bought a simple silicone ring off eBay. I put it on and keeps me hard for a few hours while I edge. Absolutely love it. But I think you need to build up your time you keep it on over a few sessions, because it can get painful when you first start

Sounds hot. Think I will give the silicone version a try.

 

[fac401]

I had a silicone ring for a while but it never really did anything for me. Maybe at that time in my life I didn’t have a difficult time staying hard.

My question is this... my silicone ring was cock only. What are the advantages to one that goes around the whole package, cock and balls? Will it make me last longer?

 

[Idpthrtonmykneesinpanties]

The way I use them is..

I use them when I suck another guys cock! I will get on my knees in front of him and pull out his cock putting it immediately in my mouth. After a few minutes in my mouth I will take his cock out then take a cock ring and put it on all the way at the base around his balls and his cock. Right away his cock is incredibly hard! If he doesn"t just grab my head and bury his cock down my throat, I will open wide and bury his cock all the way down my throat. By this time he is usually holding my head with both of his hands and moving his cock in and out of my mouth. Not long after that he is rapidly fucking my mouth and exploding with extra force and filling my mouth and throat full of cum. When he is done I will take the cock ring off and take it deep again down my throat just in case there is any held back. Since I have started using a cock ring I have friends of mine that have never been with a guy that ask me to suck their cock again or they tell me they have not been laid in a while and they want me to take it all down my throat!

 

[HornyHal]

I stumbled across this thread and loved all the tips and advice and humor. I further loved the above description of the use of cock rings solely for sucking cock. I have always wanted to try using a cock ring. I pride myself of my crotch bulge while in my work pants or jeans and love the idea of making it even more pronounced. Having never worn one I can only imagine that knowing it was there would make me rock hard a lot in the beginning just for the pure erotic knowledge that I have a cock ring on and possibly it would make me cum in my pants from excitement but I would also imagine that this would calm down after continued use so that I would have the desired over pronounced bulge of flaccid cock and swollen balls. The thought of all that is currently making my cock throb with excitement. I want to stroke my dick so bad right now.