Coffee?

Status
Not open for further replies.
I have a SBC to rebuild for a Corvette, but haven't got started yet. Just finished one, so I'll take it easy for a while. What are you rebuilding, a Mopar?


That depends . . . is the new pope a Catholic??? ;)


I bought two B-block 400's at a guy's fire sale - obscenely cheap - and I found a 383 "recipe" that is good for 450HP . . . so, with a few Wat tweaks and the slightly bigger platform, I'm gunning for 500 at the flywheel. On pump gas.
 
The one I just finished was a 538 hp 383 in small block stroker. I actually took some HP out of it when I rebuilt it with a lesser cam. Then I sold it and the car for a huge profit.:)

Good morning - still waking up.


I made some good headway on yesterday's tasks.


I'm glad for those 383 strokers, because some of the info for them translates nicely to the 383/400 Mopars because of the basic size. Of course, anything you have 8 choices for in a Chebby, you have maybe 2 for in a B-block Dodge. But it's better than it used to be.
 
I got to my coffee drinking a bit late today, so good afternoon. The engine I still have left to do is the original L46 350 that came in the 69 vette I just sold. I'm going to hook it up with the original Muncie 4 speed for a fee and give it back to the new owner.


One down and one to go. Four hundred bits are piling up. The block of the first one looks good. It's in for a .030" bore, and align-hone, my steel 383 crank (it has a cast iron crank), and some new rods and pistons and pins. I think I can get it tanked next week and start de-burring the block and passages.
 
I break the edge of every hole I see. Aircraft paranoia.:D

Every 90 degree edge or radius represents a stress riser and a potential crack. It takes a lot more time but you get better reliability and besides it's good shop practice.

I buy a lot of my parts and things from Summit, do you?


Yeah, I read a book on good block prep, and that guy is this kind of anal and mentions cracks and breaks, so I can learn. Some of my best work is plagiarism.


This is my first engine in . . . 31 years, so, no, and I don't like their website much. I've been doing general searches and shopping that way, making lists of what I need and going from there.
 
I'll tell you this. I've used them for years now. Mostly I call and order out of their catalog. They have a great customer service base, great technical types to advise on parts, etc., great shipping department too. I've never had anything except the best service and quality from them.

Is this a complete rebuild with new parts?


Yes, I am planning it for a keeper - complete with some performance goodies, too. Definitely pistons and rods, headers, an intake (probably the Edelbrock performer 2-plane), and some cam, and an MSD ignition. I am toying with one of the new learns-while-driving EFI and new heads. We'll see how the budget holds out.

I'll ask them for a paper catalog - I like those better anyway.
 
I couldn't have any past noon, and it was so doctored up with foofoo stuff it ended up being coffee 'flavored'.


I can have one cup after dark, before 9 or so, and still get to sleep. The second can make it problematic, so I hold it to one. I sometimes have a couple of cups of tea in the late afternoon. I usually sleep like a log for most of the night.
 
I use MSD exclusively on my engines. I've had good luck with Crower rods, pistons, and camshafts, good luck with Comp Cams too. Edelbrock is good so is Weiand. Last engine I built had an Edelbrock dual plane high rise RPM manifold and an Edelbrock Performer 800 cfm carb. Unless you're into nostalgia like I was, try and get up the money for one of the very good EFI systems they have out there now. It won't give you any more horse power, but it's a lot more efficient, easier to tune, and reliable than carbs.


I'm not bad on reading plugs and some carb tuning by ear, but I just read a great article in Popular Hot Rodding about.the new EFI systems. I'd say, getting the mixture right will make a few more HP - or at least should avoid losing any - and we don't want to go through all that foolishness and then leave any on the table.


I may be putting some of this on hold for a few weeks, as I just found a local much-lighter platform for a reasonable price. I'm going to go look at it after the guy e-mails me a few more pictures when he gets back to town.
 
Status
Not open for further replies.
Back
Top