Coffee?

Status
Not open for further replies.
That almost sounds like an affirmation that you've maximized your Hump Day celebration.:D

Thank you for that my dear.

I'll be heading out to the local car show today,maybe eat a little Mexican food. I haven't got anything planned for the weekend yet.
Car Show!!??? Mexican Food!!??

You sound like my kind of date! *kiss*

Have you been to the Studebaker Museum in South Bend, Ill? It is freakin' awesome!!!
 
What do you do, pull the lens, add body cap with pin hole and shoot? What is the dia. of the pinhole?

In a nutshell, yeah.

The physics/optics of pinholes is more than I can explain here. But it's all over the web. The diameter of the pinhole is calculated to correspond to the "focal length" (pinhole-to-film distance) and the desired image circle size. The hole should be as round and as smooth as possible, and in extremely THIN material. But that's only relevant when you're getting precision pinholes made (e.g., laser-drilled in .0005" stainless steel, etc.

For a beginner (and the hole I'm currently using on my DSLRs), I just drilled a 5/16" hole in a spare body cap. I Krazy-glued a 1/2" square of reynolds wrap over the hole, and I made the tiniest possible pin-prick through it with a fine-gauge sewing needle tip. (If you push the needle all the way through, the hole will be too large.)

I haven't done the math yet, but I'm guessing that this one is +/- f/256.
 
No I haven't, I'd like to someday. I always liked them. They looked a bit strange for their era but some were fast.:)

We have two local car shows a week here, I used to attend both but now go for just one. There's a nice Mexican place the on the street and some great covered tables there from which to observe the cars as they cruise by and of course the scantily clad females frequenting the area. I know it's tough. :D;)
Sounds like Car Guy Heaven! Lucky you!!

There is a lot more than Studebakers at the museum. South Bend was a major "factory" city in it's hey day. It has a lot of cool stuff from those old factories. As well as some really cool military vehicles. Bronze and I love that kind of stuff!
 
Lenses bend light by refraction. Pinholes are based on the principle of DIFFRACTION -- bending light as it passes next to an edge.

Depth-of-field with a pinhole is practically infinite.

Make the hole in too-thick material and you end up with a "pin tunnel", which doesn't work as well.

Need a nice, smooth-edged, perfectly round hole -- which is why laser holes work so well. (All my best, precision holes come from a laser outfit in MD.)
 
Lenses bend light by refraction. Pinholes are based on the principle of DIFFRACTION -- bending light as it passes next to an edge.

Depth-of-field with a pinhole is practically infinite.

Make the hole in too-thick material and you end up with a "pin tunnel", which doesn't work as well.

Need a nice, smooth-edged, perfectly round hole -- which is why laser holes work so well. (All my best, precision holes come from a laser outfit in MD.)

I'm sure you've looked at ƒ295
 
LOL
the cat and I were laying on the couch, when suddenly I cought the green glow of the coffeemaker's clock. Power! Shot off of there like a bat out of hell to make me some.

Gah. Almost went into work just to get coffee. And I hate their coffee.
 
LOL
the cat and I were laying on the couch, when suddenly I cought the green glow of the coffeemaker's clock. Power! Shot off of there like a bat out of hell to make me some.

Gah. Almost went into work just to get coffee. And I hate their coffee.

Mom called from the hospital yesterday at 0640, bitching about no coffee until 0800, and how that would never do. I foisted that one off on baby brother.


You know that I know . . . .
 
http://fonzation.com/blog/wp-content/uploads/2007/12/morning%20coffee.JPG

Ugh. I woke up to find the power had been out for hours.

No coffee.
No 'net.

That was a long hour until it came back on and I could make my coffee!

Good morning, FRH!! :rose:Awww...that sucks! Glad you got restored! Hope your morning has improved!

Poor you. That's just awful.


Your day is improved from here on out.

Good morning, Wat! :rose:

Morning FRH, coffee drinkers, we have plenty.:D

Good morning, VBaby!!:kiss::kiss::kiss: Sits down to share your cup. ;)
 
I am well and good.

That's nice, glad to hear vette

Let me know when you're going to the fish house, make it a sunny afternoon. I'll bring my convertible :)
Nice scenery on 101 on the wkends, I went Sun w/ no shirt on :cool:
 
Having a skincare party for my girlfriends Friday evening. That should be fun.

That sounds like a ton of fun!! I'm jealous!:) I'll just be scanning family pics to get them all on disc. I don't think I'm ever going to get that project done!

Good morning Babe, have a seat, we have plenty.:kiss:

Kisses to you, baby!! :kiss::kiss: Thanks for offering your lap!:D
 
Status
Not open for further replies.
Back
Top