Shankara20
Well, that is lovely
- Joined
- Sep 20, 2005
- Posts
- 58,546
Not so long ago a friend here asked about how to get all a male playmates "stuff" through the big ring of a gates-of-hell like this one below (clickable)
this is the answer I sent:
"that big ring hold it all in place and with some tender but persistent effort balls can go through some small rings. His cock must be soft - and must go in first, then one ball is pushed through from the back then the second ball is pushed through. after that the cock is put into the rest of the rings.
It does take some time and often the guy should do it himself - 'cause most get hard when someone else is doing all that messing about with them there parts. And at first a guy who has never put a cock ring on before will have some fear about hurting themselves. Once they experience that second ball going through a small place they understand how it works"
as I like to be helpful and show off my bits I make up this thread as sort of a show and tell.
So, step by step, here is how I get all my stuff through small a small space
once a cock is in the fun parts start - first one ball
now, pulling the stuff already through to the side, start pushing the other ball into the ring. It is possible at just before this point ball number 2 might slide up into his body. There is an opening for all the plumbing from a guys body down to his ball to go through - sometimes a ball can go back up there, pushing gently on the pubic mound he will feel the errant ball and he can persuade it back into place - that can all be a little freaky the first time it happens.
Most often it just pops through the ring
and there it is - all in
http://iampix.bmezine.com/w/p/adj0nq/n4fax8xu.jpg
http://iampix.bmezine.com/w/p/adj0nq/rfskiubo.jpg
then the rest of the rings can be threaded over his cock and the fun can start.
Anyone else want to share "bunch-a-bits-through-a-small-place" story?
this is the answer I sent:
"that big ring hold it all in place and with some tender but persistent effort balls can go through some small rings. His cock must be soft - and must go in first, then one ball is pushed through from the back then the second ball is pushed through. after that the cock is put into the rest of the rings.
It does take some time and often the guy should do it himself - 'cause most get hard when someone else is doing all that messing about with them there parts. And at first a guy who has never put a cock ring on before will have some fear about hurting themselves. Once they experience that second ball going through a small place they understand how it works"
as I like to be helpful and show off my bits I make up this thread as sort of a show and tell.
So, step by step, here is how I get all my stuff through small a small space
once a cock is in the fun parts start - first one ball
http://iampix.bmezine.com/w/p/adj0nq/7inbc65w.jpg
http://iampix.bmezine.com/w/p/adj0nq/g5evidvk.jpg
http://iampix.bmezine.com/w/p/adj0nq/g5evidvk.jpg
now, pulling the stuff already through to the side, start pushing the other ball into the ring. It is possible at just before this point ball number 2 might slide up into his body. There is an opening for all the plumbing from a guys body down to his ball to go through - sometimes a ball can go back up there, pushing gently on the pubic mound he will feel the errant ball and he can persuade it back into place - that can all be a little freaky the first time it happens.
Most often it just pops through the ring
and there it is - all in
http://iampix.bmezine.com/w/p/adj0nq/n4fax8xu.jpg
http://iampix.bmezine.com/w/p/adj0nq/rfskiubo.jpg
Anyone else want to share "bunch-a-bits-through-a-small-place" story?
