Another Weed Eater

I've heard good things about Hitachi string trimmers, apparently they make other things besides magic wands!

When I used to do that type of work years ago we used Tanaka professional grade stuff, we couldn't break them and they were much lighter and vibrated less than the other brands we used.
 
Are you lot just not taking care of your equipment?
Mine is 5 yrs + old, and works first time, every time.
Mind you, when we've finished working, it gets thoroughly cleaned and checked before being put away, as do all our tools.
 
Like any other discerning man, I come to the GB for power tool/equipment advice.

I have gone through about 3 of these fuckers in 4 years. I did Stihl last time. I need something duraphuckingble.

:cool:
Troy-Bilt if you're lookin' for a gas operated one. Goats will work too, you can feed the goats and your local coyotes at the same time... :D
 
Are you lot just not taking care of your equipment?
Mine is 5 yrs + old, and works first time, every time.
Mind you, when we've finished working, it gets thoroughly cleaned and checked before being put away, as do all our tools.

Well aren't you just ducky.
 
Sheep, as an alternative, think of the sweaters you can sell afterwards.
 
Anything 4 stroke.
Low rpm, low vibration, and great torque.
Fucking durable too.
 
Like any other discerning man, I come to the GB for power tool/equipment advice.

I have gone through about 3 of these fuckers in 4 years. I did Stihl last time. I need something duraphuckingble.

:cool:
Stihl is a pretty good product. Though I never owned one. 3 in 4 years? You are doing something wrong. I know a lot about these things. I could write a book on them.

I am assuming you are using gas/oil combo weed eaters.

I rarely have a problem using weed eaters. 2 key mistakes most people make when using weed eaters are trying to force them to cut and constantly keeping the throttle on high. Keeping them clean at the spool and around the exhaust are also important. If it has a sponge filter at the intake, clean it occasionally either by wiping it off dry by hand or washing it with warm soapy water by hand. Do not put it back on while it is wet. NEVER let it rest or hang upside down, unless you are starting it per instructions.

Let the weed eater work at its' own pace and gradually let it snip away as you move it back and forward or ease into tight places while simultaneously trigger throttling it to the max. Once you back off, release the throttle control and let it resume to idle speed before throttling up again. Most weed eaters can handle cutting up high, above your head, for a limited time before flooding out or shutting off due to fuel starvation.


My personal favorite is the Ryobi, at least for the money. Gotta keep an eye on the spark plug and fuel line. Most times, I need to remove the spark plug for cleaning after using for long periods. They tend to flood or leak at the fuel tube connection when super hot or jerked around a lot when using. Good start and response on the trigger though. My Ryobi doubles as a driveway trim cutter, but not good if I force it into the ground. The rotary attachment uses either the standard spool trimmer line or the quick change thick lines on the outer cusp (my favorite option).

I also have a Toro. Which is just as good or better than my Ryobi, only it gets heavy after an hour or so. Plus, if you buy Toro at Ace Hardware, it comes with a full one year warranty and no exchange charge. This Toro of mine has 5 interchangeable attachment options. I tend to use this one when I want the metal blade attachment for small shrubs or cutting down wild and thick growth. Also, it can double as a leaf blower. And a great quick release shoulder strap that actually works the way it should.
 
Last edited:
Are you lot just not taking care of your equipment?
Mine is 5 yrs + old, and works first time, every time.
Mind you, when we've finished working, it gets thoroughly cleaned and checked before being put away, as do all our tools.

I do the same thing with all my yard equipment. I am real anal about tool maintenance too. Shit gets expensive when you do not properly maintain it or take advantage of the warranty.
 
I do the same thing with all my yard equipment. I am real anal about tool maintenance too. Shit gets expensive when you do not properly maintain it or take advantage of the warranty.

Even the rakes and shovels get cleaned and sprayed with WD40 before being put away.
I figure I wouldn't put a kitchen tool away without cleaning it, so why let my garden/garage tools be neglected?
 
Like any other discerning man, I come to the GB for power tool/equipment advice.

I have gone through about 3 of these fuckers in 4 years. I did Stihl last time. I need something duraphuckingble.

:cool:

I hire Mexicans and let them worry about it...
 
Friend, we are down to petroleum by products and pack animals.


Outside the box. Break a paradigm and know what it is like to be 13th.:cool:
JAJ, knowing these things comes in handy. You never know when you will be driving past some hawt daisy-duke short wearing, braless tank top mama. Working up a sweat in her yard. In need of a knowledgeable, experienced weed eater man.:cool:

Even the rakes and shovels get cleaned and sprayed with WD40 before being put away.
I figure I wouldn't put a kitchen tool away without cleaning it, so why let my garden/garage tools be neglected?
Most men over look women who can properly maintain shafty equipment. It is a shame.
 
Every time I see this thread title come up I think its gonna be another political thread:rolleyes:

Yeah. Try finding a new old-fashioned two sided ax these days. It is getting more difficult find new ones because some dim witted activists are arguing they are too dangerous to use.

And some cities are increasingly imposing local ordinances to enforce usage of 4 stroke weed eaters instead of the 2 stroke ones. Their arguments being that the 2 strokes are too loud and polluting the environment.:rolleyes:
 
Yeah. Try finding a new old-fashioned two sided ax these days. It is getting more difficult find new ones because some dim witted activists are arguing they are too dangerous to use.

And some cities are increasingly imposing local ordinances to enforce usage of 4 stroke weed eaters instead of the 2 stroke ones. Their arguments being that the 2 strokes are too loud and polluting the environment.:rolleyes:

They did that to our sleds too...fucking 4 stroke pos's...its still political dammittttt
 
Yeah. Try finding a new old-fashioned two sided ax these days. It is getting more difficult find new ones because some dim witted activists are arguing they are too dangerous to use.

And some cities are increasingly imposing local ordinances to enforce usage of 4 stroke weed eaters instead of the 2 stroke ones. Their arguments being that the 2 strokes are too loud and polluting the environment.:rolleyes:

http://www.sears.com/shc/s/search_1...uble+axe&sid=ISx20070515x00001a&psid=18x85205
 
Back
Top