Ass Hook help

[where]

.....

 

[WriterDom]

You should experiment with different sized objects and find what you like. No one can know that for you.

 

[ecstaticsub]

Are you getting one that is just a hook or a hook with the ball on the end? I personally think the one with the ball on the end looks safer and more erotic,too.

May I ask why you are having one made instead of buying a pre-made one?

 

[where]

.....

 

[where]

.....

 

[StrayKat]

I can't think how to measure it short of getting the fabricator to come over here and do some internal and external measurements.

I'm hoping he will allow me to make something for him in return

I think that answers it, no?

 

[where]

.....

 

[ecstaticsub]

Then it is not really the radius of the ball but the angle of the hook?

My advise whould be to go to a craft store and get a long pipecleaner. Bend it to a shape you think would work and try it out. Through trial and error keep trying different angles until you find a good fit.

Then compare it to the pre-made ones available. You should be able to get a reasonable idea of the size by looking at a good picture.

Having someone you know make it for you sounds like so much fun.

 

[where]

......

 

[WriterDom]

I don't think the angle is that critical. I'd check out commercial ones and do a copy.

 

[where]

.....

 

[ecstaticsub]

I think angle and radius are important. Good idea with the pipe cleaners. I was thinking along the lines of a man's hand curling round into me...

*cunt spasm*

*ass-to-clit spasm*

Yeah, a hand would be a better way to measure ...


I personally would go for a 1.5 in diameter ball with a 0.75 inch diameter of the metal itself. The loop would be more curvy than straight. It would be a great feel to have it as snug as comfortably possible. The ones I have seen commercially are too straight.

 

[WriterDom]

The ones selling now are probably made for some other reason and would be very cheap if you knew where to get them.

 

[RawHumor]

This thread is all kinds of hotness.

 

[where]

*ass-to-clit spasm*

Yeah, a hand would be a better way to measure ...


I personally would go for a 1.5 in diameter ball with a 0.75 inch diameter of the metal itself. The loop would be more curvy than straight. It would be a great feel to have it as snug as comfortably possible. The ones I have seen commercially are too straight.

I'm more basic!

The ones selling now are probably made for some other reason and would be very cheap if you knew where to get them.

no... I think they are purpose made, but yeah, at £150 they aren't cheap.

This thread is all kinds of hotness.

pervert!

 

[WriterDom]

http://twistedmonk.com/hook.htm

Some cheaper ones there

 

[where]

.....

 

[eastern sun]

My advise whould be to go to a craft store and get a long pipecleaner. Bend it to a shape you think would work and try it out. Through trial and error keep trying different angles until you find a good fit.

There's foam covered wire that might be more comfortable to use than a pipe cleaner for this purpose. It's thicker, smoother and softer, but will still hold its shape when you bend it. I've seen it in arts supplies and crafts stores here in the United States.


edited - as in something like this http://www.acehardwaresuperstore.com/grip-twist-industrial-strength-twist-tie-p-82959.html

or check this out !! http://www.asseenontvguys.com/index.asp?PageAction=VIEWPROD&ProdID=353

I was trying to find the raw tubing, but hey! another plaything where you least expected it . . . .

 

[where]

There's foam covered wire that might be more comfortable to use than a pipe cleaner for this purpose. It's thicker, smoother and softer, but will still hold its shape when you bend it. I've seen it in arts supplies and crafts stores here in the United States.


edited - as in something like this http://www.acehardwaresuperstore.com/grip-twist-industrial-strength-twist-tie-p-82959.html

oooh! look what drew my eye on that page!

http://www.acehardwaresuperstore.co....html?osCsid=ae25c1efa03b208bde7d1eef71a362cd


the hangars kinda look ... useful. I've never seen anything like that here

 

[Etoile]

And don't forget to tell your radius apart from your diameter. You might end up with something really big otherwise!

 

[where]

And don't forget to tell your radius apart from your diameter. You might end up with something really big otherwise!

ahahahahaha! very funny! though steel with a 6 inch diameter would prolly be too heavy for me to lift, let alone try and insert! all that effort would be wasted.

 

[WriterDom]

oooh! look what drew my eye on that page!

http://www.acehardwaresuperstore.co....html?osCsid=ae25c1efa03b208bde7d1eef71a362cd


the hangars kinda look ... useful. I've never seen anything like that here

Cheap and rubber coated. Sound like a winner. Who wants to be hooked up?

 

[where]

.....

 

[Washingtonapple]

Fun stuff

So do any doms have one of these and want to try it out on a cute 22m in Washington or Colorado send me a pm what your interested in doing I love to experiment

 

[Sir_Winston54]

So do any doms have one of these and want to try it out on a cute 22m in Washington or Colorado send me a pm what your interested in doing I love to experiment

The BDSM Personals are over that --------------> way. Just go down the hall, 14th door on the left.