LITEROTICA PODCAST
LIT CAMS (200 Free Tokens)ADULT TOYSVOD MOVIES

Homemade treasures

L

Limbhugger

Team Slut Towel Boy
Joined
Sep 14, 2003
Posts
3,031
This topic seems fairly common on the How To board (although of a different flavor) and I've seen it oft asked in other sites.

It's no secret that our tools of the trade can be quite expensive. Now grant you, nothing beats a well made high quality tool. But I find there are a lot of things we can create on our own and derive a great deal of pleasure from.

I've found a number of links to "do-it-yourself" projects. Some are good, some aren't so good.

At any rate, I made Wife a few goodies. I had sooooo much fun making them because the entire time I could picture her devilish smile as she surveyed my work. To me it was like a gift presented in gratitude for all she does for me. Unique and all her own. Born of my imagination and my desire.

Here is a pic of a couple of the goodies I've made her. I also braided her a 4ft single tail out of nylon cord. I did that years ago and she wasn't sure how to react to it. Thank goodness she knows exactly how to now!
 
very nice

I make ribbon floggers for my enjoyment (and the enjoyment of my girlfriend, my boy(s) and whichever friends decide to buy one from me....:D ), and between the 3 of us, we have started quite a collection of homemade toys - I'll have to share some of the pics ... as soon as I find them again.
 
Thank you and I've loved to see the pics. Always looking for ideas. The two pieces of PVC in the pic I posted are threaded with end caps attached. That allows me to make Wife new styles of ends and she can simply unscrew one and attach another to suit her fancy.
 
Limbhugger said:
Thank you and I've loved to see the pics. Always looking for ideas. The two pieces of PVC in the pic I posted are threaded with end caps attached. That allows me to make Wife new styles of ends and she can simply unscrew one and attach another to suit her fancy.
Click to expand...

Our boy made one already with pvc, and is going to make another one (matching floggers for his Dommes :D ), but he couldn't get the glue to hold for the ends & has to re-do them ... what did you use? we just have cheap candle holders that he drilled holes in, and since I am severely allergic to the pvc glue, I'm not too keen on him re-gluing any time soon.
 
I have started to make a cat but only have a pic of a couple of the falls but it gives you an idea what it will look like when i get the time to actually finish it :)
 
SweetDommes said:
Our boy made one already with pvc, and is going to make another one (matching floggers for his Dommes :D ), but he couldn't get the glue to hold for the ends & has to re-do them ... what did you use? we just have cheap candle holders that he drilled holes in, and since I am severely allergic to the pvc glue, I'm not too keen on him re-gluing any time soon.
Click to expand...

Nothing will hold PVC together that is too far from PVC glue (rubber cement, etc.). I used pre-threaded PVC nipples. They come in standard lengths and diameters. They can be a little tricky to find but they are out there. I'm fortunate in that I have a "source."...lol. But he may be able to drill through the PVC and hold it together with carriage screws.

Another idea is copper. If your boy can (or learn to, very easy) solder, copper can make for some very functional and beautiful toys. You can buy lengths of pipe for next to nothing and the end caps are everywhere. When polished they can really be something special.
 
I'm afraid I haven't made any of my own yet, but they were custom/hand made for me by a close friend.... does that count?
 
Limbhugger said:
Nothing will hold PVC together that is too far from PVC glue (rubber cement, etc.). I used pre-threaded PVC nipples. They come in standard lengths and diameters. They can be a little tricky to find but they are out there. I'm fortunate in that I have a "source."...lol. But he may be able to drill through the PVC and hold it together with carriage screws.

Another idea is copper. If your boy can (or learn to, very easy) solder, copper can make for some very functional and beautiful toys. You can buy lengths of pipe for next to nothing and the end caps are everywhere. When polished they can really be something special.
Click to expand...

good idea. I found the pics that I want to share, but now I have to re-size them so that I can attach them ... :rolleyes:
 
One that I just mailed to a friend - he likes very much.
 

Attachments

  • guardians1.jpg
    guardians1.jpg
    18.8 KB · Views: 251
And a beaded one (my personal fave) :D
 

Attachments

  • jynxy\'s small.jpg
    jynxy\'s small.jpg
    10.3 KB · Views: 236
Nothing like a bit of creativity to get the juices flowing. Any Dom/Domme I would think would love to have a "piece" done by thier loving sub. I sure know I do!!!
Scarlett:kiss:
 
Scarlett_t2 said:
Nothing like a bit of creativity to get the juices flowing. Any Dom/Domme I would think would love to have a "piece" done by thier loving sub. I sure know I do!!!
Scarlett:kiss:
Click to expand...

I like what the boy has made (or tried to, it's not quite finished yet), but most of our toys have been made by me. and the boy always feels privalaged when we use the toys that I have made on him.
 
Though it's not homemade, I've become quite fond of an object that I've aquired... when used in the proper manner it pose as nothing kinky at all, but when put into action with my imagination I've gotten some amazing results... I have a Conductor's Baton (yes I'm a music person). I like it to be LIGHTLY swatted on my rear. (hard swats induce EXTREME welts and eventually bleeding)
 
I made our canes a couple of years ago. Have some pics of them alone somewhere but couldn't locate it so here's one with some of our other favourite things. :D

Catalina :rose:
 
Wonderful contributions sweetdommes and catalina!

A ribbon flogger...now there's imagination.

catalina may I ask how make your canes?
 
A perfect thread for a question that's been on my mind since the Fetish Flea.
The link posted above by WriterDom is great, but the way it shows to make a leather flogger is by tacking the falls to the base of the handle. At the flea we saw several made by pulling the leather falls through the handle.
I'm wondering what kind of materials and technique are used to do this. If anyone knows or has a link, that would be awesome. :)
 
Zaudika said:
A perfect thread for a question that's been on my mind since the Fetish Flea.
The link posted above by WriterDom is great, but the way it shows to make a leather flogger is by tacking the falls to the base of the handle. At the flea we saw several made by pulling the leather falls through the handle.
I'm wondering what kind of materials and technique are used to do this. If anyone knows or has a link, that would be awesome. :)
Click to expand...


Here is the suede leather flogger my slave had my friend make for me.
http://www.tnrdgrnr.com/woody/suede_flogger.jpg

As you can see, it was created by having the falls loop around a D ring, and then have the handle woven around the end to secure them. Fairly simple solution actually, and should be adjustable to thicker width falls as well. (These are 1/4 in. wide, by about 1/8 - 3/16 in thick.)

Hope this helps!
 
Last edited:
dragonlace said:
I have started to make a cat but only have a pic of a couple of the falls but it gives you an idea what it will look like when i get the time to actually finish it :)
Click to expand...

Looks beautiful. Hope you share the finished piece with us.
 
TNRkitect2b said:
Here is the suede leather flogger my slave had my friend make for me.
http://www.tnrdgrnr.com/woody/suede_flogger.jpg

As you can see, it was created by having the falls loop around a D ring, and then have the handle woven around the end to secure them. Fairly simple solution actually, and should be adjustable to thicker width falls as well. (These are 1/4 in. wide, by about 1/8 - 3/16 in thick.)

Hope this helps!
Click to expand...

That is really nice, and exactly what I'm talking about. Do you know what kind of material the handle is made out of? .. because of the two different shapes I'm guessing that there's something under the weaving. The weaving of course, is another technique I need to learn to do so I can make a nice flogger.
 
Zaudika said:
That is really nice, and exactly what I'm talking about. Do you know what kind of material the handle is made out of? .. because of the two different shapes I'm guessing that there's something under the weaving. The weaving of course, is another technique I need to learn to do so I can make a nice flogger.
Click to expand...

The handle material is actually just woven suede leather strips as well, including the hilt and pommel bulges. I'd really have to examine and reverse-engineer the thing to figure out how he ties them in together, but there are no other materials other than the leather strips and the D ring.
 
wow some very nice links, I would like to make one someday for my future mistress :eek:
 
You must log in or register to reply here.

Similar threads

D
Remote Play, Real Power
Replies
0
Views
143
DoItAgain1144
D
F
👀 Mother’s Day Reflections: How Doms Really Nurture Their Good Girls!! 👅
Replies
1
Views
268
calmlikeabomb
calmlikeabomb
TheRedLantern
How to learn about BDSM?
Replies
1
Views
249
filthytrancendence
filthytrancendence
K
What's Your Favorite Act of Service to Give or Receive
Replies
13
Views
436
BarbieDoll1982
B
Boat1
Thoughts on "Domme/Dom Space?"
Replies
16
Views
556
SPARTAN047
SPARTAN047
Back
Top