johnnysuede
Virgin
- Joined
- Jun 13, 2016
- Posts
- 2
Real vs Fugazi
There are 2 kinds of Hitachi. The real one has a big motor in the handle. The Fugazi ones have a small motor all in the head. My small one was screeching like an owl so:
1) Remove the vinyl cover (like a condom) over the top.
2) Remove some of the foam to get access to 6 little screws (need jewelers type phillips screws
3) put a drop of 3 in one oil in the oil hole of the motor and near both ends of spindle
4) remove clear plastic motor sheath
5) replace motor sheath with double-styk tape a around and set back in situ. Make sure 1/2 moon vibrator is clear.
6) Replace screws. Test motor it should be quiet and smooth . If ok
7) Put back foam and wrap with electruical tape
8) Finally to keep vinyl from rotating over electrical tap put one loop of double styk tap and
put back on white vinyl cover.
You're done.
There are 2 kinds of Hitachi. The real one has a big motor in the handle. The Fugazi ones have a small motor all in the head. My small one was screeching like an owl so:
1) Remove the vinyl cover (like a condom) over the top.
2) Remove some of the foam to get access to 6 little screws (need jewelers type phillips screws
3) put a drop of 3 in one oil in the oil hole of the motor and near both ends of spindle
4) remove clear plastic motor sheath
5) replace motor sheath with double-styk tape a around and set back in situ. Make sure 1/2 moon vibrator is clear.
6) Replace screws. Test motor it should be quiet and smooth . If ok
7) Put back foam and wrap with electruical tape
8) Finally to keep vinyl from rotating over electrical tap put one loop of double styk tap and
put back on white vinyl cover.
You're done.